Pool volume and chemical dose
A 24 ft round above-ground pool filled to 48 in holds about 51,200 L (13,500 US gal). Enter your sizes, then your product label's dose to know how much to add.
Water in the pool
50,225 L
- 50.2 m³
- 13,268 US gal
- 11,048 imperial gal
Your product's dose
Copy the label's dose (for example “300 g per 10,000 L”) and the tool scales it to your pool.
The label says how much the dose raises (ppm)
Enter the label's dose to see the amount for your pool.
The product label and its safety data sheet always have the last word. Store products out of children's reach (HealthLinkBC).
The levels to aim for (residential pools)
From HealthLinkBC (Government of British Columbia), File #27b on water quality in residential pools and hot tubs. Quebec's pool water-quality regulation does not cover single-family residential pools.
| Measure | Minimum | Minimum above 30 °C | Ideal | Maximum |
|---|---|---|---|---|
| Free available chlorine | 0.5 ppm | 1.5 ppm | 2 to 4 ppm | 5 ppm |
| Chlorine cyanurate | 1 ppm | 2 ppm | not given | 5 ppm |
| Bromine | 1.5 ppm | 2.5 ppm | 2 to 4 ppm | 5 ppm |
| pH | 7.2 | 7.2 | 7.2 to 7.6 | 7.8 |
| Total alkalinity | 80 ppm | 80 ppm | 80 to 120 ppm | 120 ppm |
| Stabilizer (cyanuric acid, outdoor) | 30 ppm | 30 ppm | 30 to 50 ppm | 80 ppm |
Shock treatment: HealthLinkBC describes raising chlorine to 10 times the normal concentration, then waiting until free chlorine is back in range before swimming.
Chlorine pucks are not to be put in the skimmer, according to HealthLinkBC.
How it is worked out
Volume is geometry: the water's surface times its depth. A round pool is a circle; an oval above-ground pool has two straight sides and two half-circle ends; an in-ground pool with a sloped floor uses the average of its shallow and deep ends.
Units follow Canada's Weights and Measures Act: the Canadian (imperial) gallon is 4.54609 L. Many labels use the US gallon (3.785 L), so the tool gives both.
Product doses do not come from Potagel: they change from one product to the next. Copy your label's dose (for example “300 g per 10,000 L”) and the tool scales it to your pool's volume. If the label says how much the dose raises chlorine, you can aim for a precise increase.
Sources — pool: HealthLinkBC (British Columbia); units from the Weights and Measures Act.
Updated .
Frequently asked questions
How many litres of water in a 24 ft pool?
Filled to 48 inches, a 24 ft round pool holds about 51,200 litres, or 13,500 US gallons. At 52 inches it holds a little more: volume follows the water depth.
What chlorine level for a pool?
For a residential pool, HealthLinkBC aims for 2 to 4 ppm of free chlorine, with at least 0.5 ppm and never more than 5 ppm.
What pH for a pool?
Ideally between 7.2 and 7.6, and between 7.2 and 7.8 at most, according to HealthLinkBC. pH changes how well chlorine works.
How much product should I put in my pool?
What your product's label gives for your volume of water: strengths vary between brands. Work out your volume, then copy the label's dose into the tool.
Next steps
🏊 Opening your pool: step by step🛟 Quebec pool safety rulesLawn seed and fertilizerAll tools